Asic Antminer S19J Pro 110 TH/s from Bitmain buy for bitcoin mining | Asic Miner from ECOS

Antminer S19J Pro 110 TH/s



Hardware Details

  • Energy Consumption: 3250 W
  • Hashrate: 110 TH/s
  • Algorithm: SHA256
  • Condition: New

Hosting monthly service fee


Installation package fee



  • Logistic to data center
    Logistic to data center
    The data center is located in the city of Hrazdan in the Republic of Armenia, on the territory of the Free Economic Zone. The delivery and installation time can vary from 14 days to 1 month.
  • Connection to the mining pool
  • Security
    The area of the data center is protected with armed security and round-the-clock video surveillance.
  • Pre-check
    The team of professionals from our Data Center will check the integrity of the equipment, its configuration and operability. They will make sure the rig works as intended and produces the declared power. Our specialists will unpack the device, connect it to the network and monitor its effectiveness.
  • Cables & wires
  • Installation in data center
    Installation in data center
    The device is installed in a special rack and connected to a 220-volt, 50-Hz power supply network from our own thermal powerplant. A cable with an rj45 connector is used to connect it to the Internet. Then, it is configured to work with a mining pool — a computer and the administrative interface of the device are used for this purpose alongside updating its firmware and connecting to our performance monitoring system.
  • Electricity, 100% uptime
    Electricity, 100% uptime
    The data center receives the electricity directly from the Hrazdan power station. It guarantees a steady supply of energy and almost 100% uptime.
Total Price:

Bitmain S19J Pro is a highly popular ASIC miner. It continuously consumes 3,250 W of power and operates at 110 TH/s.

Antminer S19J Pro 110th is compatible with any cryptocurrency that relies on the SHA-256 algorithm. ECOS uses this ASIC to mine Bitcoin.

To operate this unit, it is necessary to have access to two NEMA outlets that can provide 220 volts each. In addition, a single 2-pole 20 amp breaker is required for each unit to feed a 220-240 volt power line. Furthermore, two digital ballast cords with a 240 volt rating, 16 gauge wire thickness, and 10 amp capacity are needed to connect to the Antminer’s attached PSU.


The Antminer S19j Pro by Bitmain is one of the most profitable devices for mining BTC. Even with the increasing complexity of the network, it gives high competitive hash rate, while miners from other ranges with the same energy input give lower hash.


Why is it profitable to work with ECOS

ECOS Data Center was built and designed for efficient bitcoin mining. It is located on the territory of Hrazdan thermal power plant and receives electricity directly from it. This territory has ideal climatic conditions for ASICs cooling. ECOS provides clients with an all in one service for mining bitcoin with ASICs, or mining-as-a-service. This allows customers not to ponder where to install the equipment and how to maintain it. With ECOS it takes only two clicks to mine BTC. ECOS is also a legal resident of the Armenian Free Economic Zone with a number of tax benefits.

Installing the ASIC Miner is quite a time-consuming process. It needs to be set up and connected to a mining pool. To simplify the process for the user, ECOS takes care of all the installation challenges. Pre-installation check, installation, configuration and connection to the mining pool is included in the ASIC + Hosting package.

Leave a request on the website

Discuss the details with your personal manager

Pay for the order

ECOS installs your equipment on a mining farm, connects and gets it running

You get BTC every day

1. ECOS-M is responsible for any malfunction of equipment arising during the period of 6 months after the purchase on this website.


2. ECOS company will provide the repair of equipment during this warranty period.


3. What happens after the purchase?

Within 2 weeks after receiving the payment, ECOS will place the equipment in its data center. The rig will be pre-checked, connected to the power grid as well as the mining pool and configured. After that, the device will start working. The mined Bitcoins will be transferred directly to the buyer’s wallet. The buyer will be able to track the process in their personal account in the app.


4. For how long will the equipment be placed on the farm?

The average service life of an ASIC is 4 years, but you can request it for shipping at any time.


5. What will happen after the placement period expires?

If the equipment is out of order and can’t be restored, there are two options. ECOS will either ship the rig to its buyer or keep it in the data center and dispose of it.


6. Can you ship the equipment to the buyer?

Yes, we can — but not immediately after the purchase. ECOS provides the full scope of services. That’s why the rig can be shipped to its buyer with extra pay for the shipping.


7. What is the cost and delivery time for the equipment?

The cost of the shipping and the delivery time are calculated individually. It depends on the buyer’s country of residence.


8. What are the guarantees after 6 months of the rig’s exploitation at the farm?

Each case of equipment failure after 6 months of exploitation is considered individually. The rig rarely breaks down prematurely — but if this happens, ECOS will do everything possible to help its buyer. You can repair the equipment at the ECOS service center with a spare parts store and a maintenance team trained at the manufacturer. Alternatively, we can send it to you if you prefer to repair it yourself. The cost of repair depends on the specific problem that occurred with the device. After 6 months, ECOS, for its part, guarantees that the equipment breakdown will be promptly detected if it takes place. ECOS also guarantees to provide all possible repair options.

What is an ASIC?

ASIC refers to an application-specific integrated circuit. It is a type of circuit that has been designed for a single specific purpose. An ASIC miner refers to a device that uses microprocessors for the sole purpose of "mining" digital currency.

What is an ASIC mining?

This is the process of managing the blockchain and also creating new bitcoins with the help of an ASIC rig. An ASIC miner is a piece of equipment that is purposely-built solely for mining. Unlike other types of mining devices, ASICs can only be used to mine cryptos and nothing else. The mining process involves solving complex mathematical problems using intrinsic hash functions linked to the block that contains the transaction data.

What cryptocurrency can I mine with ASIC?

There are lots of cryptocurrencies that can be mined with the use of an ASIC, for example, bitcoin, litecoin, ethereum, etc. However, bitcoin is considered to be the most profitable in terms of an ASIC mining.

What is a mining pool?

A mining pool is a joint group of cryptocurrency miners who combine their computational resources over a network to strengthen the probability of finding a block or otherwise successfully mining for cryptocurrency. Participants of a mining pool individually contribute their processing power towards the effort of finding a block. If the pool is successful in these efforts, participants receive a reward, which is usually distributed equally among its miners.

Is it possible to earn from mining with an ASIC miner?

ASIC miner is the most efficient way to mine bitcoins. These are devices designed and optimized specifically for mining. The largest mining pools work with ASICs and ECOS as well.

How do I connect, install and configure an ASIC?

These processes are complicated and time-consuming, that's why we have simplified the process of mining by offering our clients several services such as pre-check and setup, connection to the mining pool, fully legal equipment/hardware, 6 months warranty, user-friendly personal account and mobile app. All these features are available to you after the purchase of plan ASIC + hosting includes.

Which cryptocurrencies can I mine with this ASIC?

This ASIC is compatible with all the cryptocurrencies that rely on the SHA-256 cryptographic algorithm. ECOS uses this ASIC to mine Bitcoin.

What level of technical proficiency is required for setup and is it accompanied by instructional documentation?

if you buy an ASIC with your own setup, you have to consider a number of technical requirements to ensure the high uptime of your rig: connection to a reliable power network, stable internet connection, cooling, performance monitoring system and do not forget about an acceptable noise level. You will find comprehensive instructions in the shipping box. Otherwise you can choose to host an ASIC at the ECOS data center with all the necessary infrastructure and 24/7 maintenance team. Whenever you have any questions, feel free to reach out to our technical support crew 24/7!

You offer multiple versions of the S19 antminer for sale. What’s the difference between them and which one should I choose?

The S19J Pro 96TH/s, 100TH/s and 104TH/s model variations differ by their hash rate. The same brand, Bitmain, manufactures them, so they’re all equally reliable. The term “hash rate” denotes the computing power of the device. The higher this indicator, the larger profit you’ll be able to make from mining. At the same time, more powerful equipment costs more, so it will take you longer to break even. If your goal is to avoid spending a lot of money and start generating profit as soon as possible, opt for a less powerful model. When calculating your future income, don’t forget to deduct the electricity expenses from your profit.

I’m choosing between 100Th/s and 104Th/s. What is the main competitive edge of each model?

The 104Th/s model has a slightly higher hash rate. This means, your mining income will be a bit higher. The 100Th/s model costs less and consumes less electricity. To make a data-driven decision, compare the profit that you’ll get from each device, taking into account the price of the energy in the area where you’re planning to place your ASIC.